Siemens SINAUT MD720-3 System Manual page 37

AT+CRLP Radio link protocol
Test
Command: +CRLP=?
Response: +CRLP: (list of supported <iws>s),(list of supported <mws>s),
(list of supported <T1>s),(list of supported <N2>s),<ver1>
,(list of supported <T4>s)
Read command
Command: +CRLP?
Response: +CRLP: <iws>,<mws>,<T1>,<N2>,<ver1>,<T4>
Executive command
Command: AT+CRLP=<iws>[,<mws>[,<T1>[,<N2>[,<ver>[,<T4>]]]]]
Response: OK
Parameter: <ver>:
<iws>:
<mws>: Window size MS to IWF
<T1>:
<N2>:
<T4>:
Notice: Default values and value ranges depend on RLP Version; refer GSM 04.22 [18].
T1 and T4 are in units of 10 ms.
SINAUT MD720-3
C79000-G8976-C211
RLP version number as Integer variable; Version number 0 indicates "RLP
version indication not available"
Window size IWF to MS
Acknowledge timer T1
Retransmission attempts N2
Re-sequencing period T4 as Integer variable
SINAUT MD720-3 in Terminal Mode
37