Log In To Sinaut Micro Sc - Siemens SINAUT MD720-3 System Manual

SINAUT MD720-3 in OPC Mode
5.5

Log in to SINAUT MICRO SC

After the SINAUT MG720-3 is switched on and configured by the control or after a
connection is broken off the SINAUT MD720-3 starts at once to connect itself with
the OPC Server SIANAUT MICRO SC, if the SINAUT MD720-3 is in OPC mode.
If the trial of the SINAUT MD720-3 to connect with the OPC Server SIANAUT
MICRO SC does not succeed it will start another trial according to the following
scheme:
After switching on:
After about 2 minutes of waiting:
After about 4 minutes of waiting:
After about 6 minutes of waiting:
After about 10 minutes of waiting:
After about 15 minutes of waiting:
Always after each 15 minutes:
62
3 trials in succession
3 trials in succession
3 trials in succession
3 trials in succession
3 trials in succession
3 trials in succession
3 trials in succession
SINAUT MD720-3
C79000-G8976-C211