Toshiba RAS-B10EKVP-E Service Manual page 89

Ilmalämpöpumppujen myynti, huolto ja asennus: Jäähdytinpalvelu RefGroup Oy.
No. Part name
%
Horizontal 1) Remove shaft of the horizontal louver
louver
$
Evaporator 1) Follow to the procedure in the item
(Heat
2) Remove the pipe holder from the rear side of the
exchanger)
3) Remove two fixing screws at the left side of the
4) Remove the heat exchanger fixing holder by
5) Remove right side of the end plate from two
Lue lisää nettisivuiltamme: www.ilmalämpöpumput.com
Procedures
from the back body. (First remove the
left shaft, and then remove other shafts
while sliding the horizontal louver
leftward.)
main unit.
end plate of the heat exchanger.
Screw
Screw
removing the two fixing screws used to secure
it.
fixing ribs while sliding slightly the heat ex-
changer rightward.
#
.
– 89 –
Remarks
Slide the horizontal
louver leftward
Pipe holder
Disengage the claw
Screw
Heat exchanger
fixing holder
Screw
Hanged part