Toshiba RAS-B10EKVP-E Service Manual page 111

Ilmalämpöpumppujen myynti, huolto ja asennus: Jäähdytinpalvelu RefGroup Oy.
Appendix
4. Cord heater installation work procedure
No. Photo / Explanatory diagram
Remove each cabinet, inverter assembly, motor base assembly, and partition board assembly.
1
* Do not damage the electric parts such as cables, connectors, etc. while this work.
1-1
1-2
Side cabinet (L)
1-3
1-4
Upper cabinet
Valve cover
Water-proof
cover
Wiring cover
Front cabinet
Inverter assembly Side cabinet (R)
Lue lisää nettisivuiltamme: www.ilmalämpöpumput.com
Remove the upper cabinet and the valve cover.
Related parts / Screws list
Part name
Upper cabinet
Valve cover
Remove the front cabinet, the wiring cover and the
water-proof cover.
Related parts / Screws list
Part name
Front cabinet
Wiring cover
Remove the side cabinet (R/L) and the inverter
assembly.
Related parts / Screws list
Part name
Side cabinet (R)
Side cabinet (L)
Inverter assembly
Remove the inverter assembly.
No. Part name
1 TE sensor
2 TD sensor
3 TO sensor
4 TS sensor
4-way valve
5
coil
6 PMV coil
7 Fan motor
Compressor
8
lead
Reactor
9
(2 pieces.)
Appendix-4
Procedure
Used screw
Screw type Quantity
Ø4 × 8
Ø4 × 1
Used screw
Screw type Quantity
Ø4 × 8
Ø4 × 8
Used screw
Screw type Quantity
Ø4 × 8
Ø4 × 8
Ø4 × 8
Connector No. Connector color
CN600 White
CN601 White
CN602 White
CN603 White
CN701 Yellow
CN700 White
CN300 White
White
(Intermediate connector)
White
(Intermediate connector)
5
1
7
2
7
3
1