Ac Power; Power Consumption; Ac Plug; Power Linking - Iluminarc COLORIST LINE 12Qa User Manual

Always connect
the Colorist™
Line 12Qa to a
protected circuit with an
appropriate electrical
ground to avoid the risk of
electrocution or fire.
Never connect
the Colorist™
Line 12Qa to a
rheostat (variable resistor)
or dimmer circuit, even if
the rheostat or dimmer
channel serves only as a
0–100% switch.
Make sure to
connect the
Colorist™ Line
12Qa to a power line with
the proper voltage and
frequency, as per the
specifications in this
manual or on the product's
sticker.
The listed current
rating indicates
the maximum
current draw
during normal operation.
When connecting
the Colorist™
Pod 18Qa to local
power, it may be
necessary to use the local-
to-IP65 adapters supplied
with this product.
Colorist™ Line 12Qa User Manual Rev. 2

AC Power

The Colorist™ Line 12Qa has an auto-ranging power supply that works with an input voltage
range of 100–240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the specifications
in this User Manual or on the product's sticker.

Power Consumption

To determine the power requirements for the Colorist™ Line 12Qa, refer to the label affixed
to the side of the product. You may also refer to the
The listed current rating indicates the maximum current draw during normal operation.

AC Plug

The Colorist™ Line 12Qa comes with an IP65 power input cord terminated with a proprietary
IP65 connector and an IP65-to-Edison power cord adapter. If the power cord adapter that came
with your product has no plug or you need to change the Edison plug, use the table below to
wire the new plug.
Connection
AC Live
AC Neutral
AC Ground
IP65 Power Connector Pins
Male

Power Linking

The Colorist™ Line 12Qa supports power linking. You can power link up to 10 products
at 120 VAC, 18 products at 208 VAC, or 21 products at 230 VAC. Never exceed these
numbers. This product comes with a power input cord. This product does not require
additional power linking cables; however, if longer power linking cables are needed, they can
be purchased separately.
Wire (U.S.) Screw Color (U.S.)
Black Yellow or Brass
White Silver or Gray
Green/Yellow Green
Technical Specifications.
Wire (Europe)
Brown
Blue
Green/Yellow
Female
Installation
IP65 Pin
1
2
3
7