Enerzone Destination 2.3 Installation And Operation Manual page 54

B
C
A
When using the blower without the thermodisc, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the blower cools the
firebox and could affect the start-up combustion efficiency if the blower is turned on too early.
- -
CAUTION: ENSURE THAT THE BLOWER'S AND/OR THE THERMODISC'S POWER CORD
ARE NOT IN CONTACT WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL
SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.
54
Destination 2.3 Installation and Operation Manual