Entering The Provisioning Server - Panasonic KX-HDV130 User Manual

Entering the Provisioning Server

If the Panasonic KX-HDV130 phone was purchased from Nextiva, then the phone should arrive with the
provisioning address already programmed into the phone. If the phone was purchased from a third
party, or if the phone required a factory reset, you will need to manually enter the provisioning address
in to the phone. Follow the instructions below to do this.
1. From the main screen, select Menu  Basic Settings  Other Option  Embedded Web 
On. The phone will beep, indicating Embedded Web is now on.
2. Press the Back softkey (left softkey) twice to go back to the main menu.
3. Select System Settings  Status  IPv4 Settings  IP Address. Record the IP Address that
appears on the screen.
4. Use your web browser to navigate to the IP Address of the phone (Figure 3-24).
5. Enter admin as the username and adminpass as the password (Figure 3-25).
Figure 3-24: Navigate to the IP Address
Figure 3-25: Log in to the Phone Interface
12 | P a g e
© Nextiva, All Rights Reserved