Making A Second Call - Panasonic KX-HDV130 User Manual

Making a Second Call

Before attempting to make a second call, you must first contact Nextiva Support to set up line mirroring
as per the section titled "Line Mirroring" in Additional Setup.
Using the Handset:
1. While on a call, press the Line 2/P2 button on the right side of the phone. The first party is
automatically put on hold.
2. Dial the phone number or extension of the party you want to call, and press the Call softkey
(middle softkey).
NOTE: Pressing the HOLD/MESSAGE button allows you to switch back and forth
between the two calls.
3. When finished, go on-hook, then go off-hook to disconnect the call with the party you are
speaking to and return to the call with the other party.
Using the Speakerphone:
1. While on a call with one call, press the Line 2/P2 button on the right side of the phone. The first
party is automatically put on hold.
2. Dial the phone number or extension of the party you want to call, and press the Call softkey
(middle softkey).
NOTE: Pressing the HOLD/MESSAGE button allows you to switch back and forth
between the two calls.
3. When finished with one call, press the SP-PHONE button on the bottom-right of the phone to
disconnect the call with the party you are speaking to. Press the SP-PHONE button again to
return to the call with the other party.
Using a Headset (optional):
1. While on a call, press the Line 2/P2 button on the right side of the phone. The first party is
automatically put on hold.
2. Dial the phone number or extension of the party you want to call, and press the Call softkey
(middle softkey).
NOTE: Pressing the HOLD/MESSAGE button allows you to switch back and forth
between the two calls.
3. When finished with one call, press the HEADSET button on the bottom-right of the phone to
disconnect the call with the party you are speaking to. Press the HEADSET button again to
return to the call with the other party.
24 | P a g e
© Nextiva, All Rights Reserved