Entering the Provisioning Server
Before beginning, make sure the MAC address for the Panasonic KX-TGP600 base unit is assigned to a
user on the account (see 'Assigning the Device to a User using the NextOS 3.0 Portal' above).
1. Turn Embedded Web On (see instructions for 'Enabling the Web Configuration Utility' below).
2. On the Panasonic KX-TPA60 handset, press the MENU softkey (middle softkey).
3. Select System Settings Status IPv4 Settings IP Address from the menu.
4. Record the IP address that appears on the screen.
5. Enter the IP address into the address bar of a web browser on your computer (Figure 3-18).
6. Enter admin as the User Name and adminpass as the Password (Figure 3-19).
Figure 3-18: Navigate to the Phone's IP Address
Figure 3-19: Log In to Phone Interface
19 | P a g e
© Nextiva, All Rights Reserved