Fuel System; General - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

4. FUEL SYSTEM

[1] GENERAL

(1) Delivery Pipe
(2) Fuel Pressure Manifold (FPM)
(3) Fuel Pump
(4) Fuel Filter
(5) Gasoline Tank*
(6) Mixer
(7) Regulator (D-EPR)
WG1605-G-E3:
The fuel is fed from the gasoline tank (5) through the fuel filter (4) to the delivery pipe (1) by the fuel pump (3).
WG1605-L-E3, WG1605-L-E3, WG1605-LN-E3:
The LPG / natural gas fuel stored in the LPG / natural gas tank (12) is sent to vaporizer (9) by pressure in the
gaseous phase in the tank through the lock off valve (10).
The LPG / natural gas fuel is evaporated in vaporizer (9) and is sent to the regulator (7) as a gaseous fuel of gas
pressure near the atmospheric pressure.
The regulator (7) mixes the gas and air is supplied in the cylinder.
WG1605-GL-E3, WG1605-GLN-E3:
This fuel system has 2 ways (gasoline fuel and LPG / natural gas fuel).
(8) Vapor Hose*
(9) Vaporizer (DSR)
(10) Lock Off Valve
(11) LPG / Natural Gas Manual
Valve*
(12) LPG / Natural Gas Tank*
(13) Coolant Hose*
1-M12
[A] Gasoline Fuel
[B] LPG / Natural Gas Fuel
(a) Gasoline Line*
(b) Bleed / Return Circuit*
(c) Gaseous Propane or Natural
Gas Line*
ENGINE
(d) Liquid Propane or Natural
Gas Line*
(e) Hot Coolant Inlet or Outlet
Line*
Component Marked * is Not
Provided by KUBOTA
9Y1210661ENM0016US0
KiSC issued 05, 2014 A