Garudan GP-514-446 User Manual And Spare Parts List page 11

anita-b GP-514-446(7)
12 Bobbin Winder – Standart Built in
Fig. 9
The thread passes from the bobbin stand through thread guide on the winder bracket (1) and
between tension disks (2) and then following the direction of arrow (S) to the empty bobbin.
Install the empty bobbin on the bobbin winder shaft (3). Wrap the bobbin threat around the
empty bobbin in a clockwise direction and push in.
The bobbin winder will stop automatically when the bobbin is full.
Take off full bobbin. Lock the thread under the clip and knife (4). Thread will be cut and kept
the bobbin thread from interfering with the needle thread.
11