Nortel i2022 Series User Manual page 44

Outside Code – This is the prefix you dial to reach a phone number outside of your business group. This is usually a 9.
Local Calls – This is the number of digits required to dial a local call after the Outside Code is dialed. Choices are 7
digit, 10 digit or 1+10 digit.
Press Change. The Teleset will prompt you to enter the number of digits needed for Inside Dialing. Select either 3, 4, 5, 6,
or 7 using the dial keypad. In our example, we selected 4. Press Save.
Next the Teleset will prompt you to enter the Outside Code. Enter the Outside Code using the dial keypad. Up to 3 digits
are allowed. In our example, we entered 9. Press Save.
Finally the Teleset will prompt you to enter the number of digits used to make a local call. This does not include the
Outside Code digits. In our example, we use 7 digit.
The Teleset's display will now be as follows.
Inside Dialing : 4 Digit
Outside Code : 9
Local Calls : 7 Digit
Next Prev Change
If all of the choices are correct press Next. If the choices are not correct, press Change.
The Teleset will now prompt you to enter all of the Nxx codes in your business group. Most users will enter only one Nxx
code. However some users and very large Centrex users, may have more than one Nxx code. Press Change and enter
your Nxx Code. In the example, we entered 555.
[Use Keypad to Enter]
1 Nxx : 555
Clear Save
Press Save. If you have multiple Nxx codes press the Next key and enter the other codes the same way. In the example
we have only one Nxx Code so we will press Finish.
i2022 ISDN Teleset
MORE is flashing
MORE is flashing
42