Table of Contents
Advertisement
If the switch supports Auto-SPID, the i2022 will display all of the SPIDs available on the line in the following format:
If the SPID displayed is not the correct SPID for your application, press the Next key.
Pressing the Detail softkey will display the SPID, the Primary Directory Number, and the Bearer Services assigned to the
SPID. The detail information is as follows:
1 : SPID=84755547360101
DN=8475554736
Bearer: Speech
Next Prev Select Prompt
When the correct SPID is displayed, press the Select softkey to choose it.
NOTE: The last 2 digits of the SPID are known as the TID (Terminal IDentifier). The i2022 automatically
inserts the TID at the end of the SPID. The TID is displayed as part of the SPID.
Auto-Download
After the SPID has been accepted by the switch, the i2022 will download the Call Appearance and Feature information
from the switch. On completion of the download, the display will momentarily show the following and then continue with
the Auto-Install.
i2022 ISDN Teleset
MORE is not lit
15
Advertisement
Table of Contents
