Nortel i2022 Series User Manual page 27

Each call appearance can ring with a different sound. This is done by pressing any call appearance key and choosing a
ring pattern (0-9) or silent alerting (#) and then pressing Accept. As an example, we press the digit 3 on the keypad or
press call appearance 3, then choose a ring pattern or silent alerting(#). We may then choose a default volume setting
and then SaVol, Accept.
Select 0-9 or #(Ring Off)
Call Appearance : 3
Pattern 0 ; Select it ?
Accept SaVol
The SaVol key sets the default volume level of the ringing pattern. The Ring Pattern returns to this volume setting if the
Teleset power is reset. The Ringing Pattern volume may be adjusted at any time by pressing the volume keys while the
Teleset is ringing. The Teleset will remember the volume setting until power is reset.
Press MENU to return to the startup screen.
nd
2 Ring
nd
The 2 Ring option controls how the Teleset audibly reacts to an incoming call on another Call Appearance when you are
already off-hook on an active call. The choices are Continuous Ring, Partial Ring, and No Ring.
With Continuous Ring, the Teleset will sound the 2
With Partial Ring, the Teleset will sound the 2
With No Ring, there will be no audible ring during the ringing cycle.
NOTE: In all cases the Call Appearance LED will flash, and the display will continue to show the Calling Line ID if
available.
nd
To set the 2 Ring option press MENU, MORE, Ring, 2ndRing
MORE is flashing
nd
nd
Ring "beep" one time only.
i2022 ISDN Teleset
Ring "beep" with every other ring cycle.
25