Table of Contents
Advertisement
Maximum power cabling distance (approximate)
Depending on the size of cable you are using, you should
remember the maximum cabling distances allowed between
the RPI and the Base Station.
Wire size
0.6 mm (22 AWG)
0.5 mm (24 AWG)
RPI Connector Overview
The following illustration shows where the input and output
connectors are located on the RPI connector board.
RPI connector board
OBIX1 OBIX2 OBIX3 OBIX4
OBIX5 OBIX6 OBIX7 OBIX8
P0881594 Issue 01
450 m (1,500 ft.)
300 m (1,000 ft.)
When using two power pairs, ensure they are
connected with the same polarity.
OBIX9
OBIX13
Single-pair
OBIX10 OBIX11 OBIX12
OBIX14 OBIX15 OBIX16
MICS-XC Norstar-Companion Installer Guide
Installation / 25
Double-pair
900 m (3,000 ft.)
600 m (2,000 ft.)
Advertisement
Table of Contents
