Replacement Of Leg Rest Sensors (Combi); Replacement Of Max Speed Sensors (Combi) - Permobil Stander Service Manual

Repairs
Replacement of leg rest and max
speed sensors.
The leg rest sensor and the max speed sensor are
mounted in the front edge of the seat, see Fig. 61.
The leg rest sensor controls the angle of the leg rest.
The max speed sensor cuts the maximum speed
in half when the backrest is tilted more than 45° to
the rear.
1. Set the Circuit breaker for the chassis to the
"OFF" position. For more information, see the
chassis service manual.
2. Remove the seat plates. These are mounted
using four screws, see Fig. 62.
3. Remove the plate that the sensor is mounted
on. It is mounted with two screws, see Fig. 63.
(Combi)
Fig. 61. The leg rest sensor and the max speed
sensor are mounted in the front edge of the seat.
Fig. 62. The seat plates are mounted
using four screws.
Fig. 63 The plate with the sensors is
mounted with two screws.
28