Replacement Of Relay Box (Combi) - Permobil Stander Service Manual

Replacement of the
relay box Combi
A relay box is located underneath the seat.It governs
the stand function cycle.
Removal
1. With the seat in the sitting position, run the
seat lift up in order to access it more easily
from below.
2. Set the Circuit breaker for the chassis to the
"OFF" position. For more information, see the
chassis service manual.
3. The relay box is mounted underneath the
case belonging to the rear seat function
board, see Fig. 54. Removal is performed
by pressing together the plastic clip fixings
that are sticking out of the underside of the
seat function board's case, see Fig. 55.
4. Loosen all the cable connections of the relay
box. Check the placement of the cables
carefully for purposes of remounting them later.
Fitting
Mounting is performed in the reverse order.
(Combi)
Fig. 54. The combi relay box is located
underneath the seat function board's case.
Fig. 55. The relay box is mounted with two
"plastic clip fixings". The relay box is shown
from below in the picture.
25
Repairs