Setting The Touch Position - Blaupunkt Aspen IVDM-7003 Operating Instructions Manual

SCREEN setup menu

Setting the touch position

This setting is required if the display position on the monitor and
the touch position on the monitor do no longer match. This may
be required after operating the device for several years.
1. Touch the button on the touch screen menu.
Setup
Setup
2. Touch the button, followed by the
3. Touch the button.
✔
The „Touch Screen" SCREEN submenu is displayed.
Touch Screen
Touch Screen
Touch Touch
Adjust
Adjust
4. Activate "Adjust" by touching it.
5. Touch the "INITIALIZING" entry.
✔
The settings menu is displayed.
6. Touch the top left field on the monitor.
7. Now touch the top right field on the monitor.
button.
ON ON OFF
INITIALIZING INITIALIZING
EXIT
EXIT
8. Sequentially touch the fields at the bottom left and right on
the monitor.
✔
This concludes the setting and the "Touch Screen"
submenu is displayed again.
Note: If you touch the entry "RETURN", no setting is
performed and the "Touch Screen" submenu is
displayed again.
9. Touch the button twice to exit the menu.
EXIT EXIT
73