Table of Contents
Advertisement
AUDIO setup menu
3.
Select "FRONT L/R" (left/right front speaker), "REAR L/R"
(left/right rear speaker), "CENTER" (center speaker) or
"SUB WOOFER" by touching it. The
can be used to scroll back and forth in the menu.
Note: Deactivated speakers cannot be selected. For
instructions, please read the section "Speaker setup"
in this chapter.
4.
Repeatedly touch to the left or right of the scale to
increase or decrease the speaker level for the selected
speaker.
5.
To confirm the setting, touch the
6.
Repeat steps 3 - 5 to perform additional settings, or
6.
Touch the
button to exit the menu.
EXIT
EXIT
Setting the dynamic range
You can adjust the dynamic range between loud and soft
passages. For this purpose, the volume of soft passages is
increased and that of loud passages is decreased.
Note: The dynamic range can be set in increments from
"OFF" to "FULL" (maximum). Select the "FULL" set-
ting for full dynamic adjustment.
Note: For the Aspen IVDM-7003, the dynamic range
can be adjusted only if you called the setup menu in
DVD mode. The setting affects only the DVD mode.
/
buttons
button.
EXIT
EXIT
1.
Touch the
button on the touch screen menu and
Setup
Setup
then touch the
button.
2.
First, touch the
button, followed by the
✔
The "Dynamic Range" AUDIO submenu is displayed.
Dynamic Range
Dynamic Range
D.RANGE
D.RANGE
PREV
PREV
NEXT
NEXT
3.
Activate "D RANGE" (dynamic range) by touching it.
4.
Repeatedly touch to the left or right of the scale to
increase or decrease the dynamic range.
button twice to exit the menu.
5.
Touch the
EXIT
EXIT
68
button.
OFF
OFF
EXIT
EXIT
Advertisement
Table of Contents
