Engine Installation (Da100) - Hangar 9 Extra 260 Assembly Manual

Engine Installation (DA100)

Required Parts
• Fuselage assembly
Required Tools and Adhesives
• Threadlock
Note: For simplicity the DA will be shown
with canister installation and the Evolution
with Muffler installation. Either engine
can be used with either exhaust option.

Step 1
Collect the items shown for the installation of your
particular engine.

Step 2
Measure mark and drill firewall to correct dimensions and
offset to the left side.

Step 3
Use a drill and 5/16-inch (8mm) drill bit to drill the holes
in the firewall for mounting the engine.

Step 4
Install the 1/4-20 blind nuts from the back side of the
firewall. You can use the bolts and standoffs to pull the
blind nuts into position.

Step 5
Install engine using four 2
aluminum standoffs and four 1/4-20 x 3
head bolts and four 1/4-inch lock washers.
7
/ -inch (73mm) machined
8
3
/ -inch socket
4
21