Step 10
Secure the ignition module to the engine box. Make
the connections between the ignition box and engine
at this time.
24
Step 11
Install the switch for the ignition at the front of the
fuselage as shown.
Step 12
Secure the battery for the ignition inside the fuselage
using a hook and loop strap. Make sure to add a few
pieces of foam between the fuselage and battery to prevent
damage to the battery caused by vibration. Connect the
battery to the ignition switch.
Step 13
Attach the fuel line from the fuel tank to the carburetor.
Mak sure the line is from the clunk and not the vent line.