Table of Contents
Advertisement
8 Using the Nortel Application Switch Element Manager
Field
Synchronize
VRRP Peers on
Apply
ASEM Server Notifications Fields
Enable
From
To
Server
Port
User
Password
Opening a Switch
ASEM provides two options for opening a switch for configuration and
management. A switch can either be opened using SNMP versions 1 or 2,
or SNMP version 3. The following sections explain how to open a switch
through either of these methods.
Opening a Switch Using SNMP versions 1 or 2
To open a switch using SNMP versions 1 or 2, follow this procedure:
Step
1
Copyright © 2008, Nortel Networks
.
Description
If checked, the switch synchronizes the SLB, filter, and
VRRP configuration on a peer switch on Apply. To take
effect, peers must be configured on the switches and the
administrator password on the switches must be identical.
Enable or disable ASEM Server e-mail notifications.
The e-mail address used to send the notification.
The e-mail address that receives the notification.
Note: This field supports only a single e-mail address. To
send an e-mail notification to multiple addresses, create a
mail list for those addresses.
The e-mail server used to send the notification.
The port used by the e-mail server to receive messages.
The user name used to log into the e-mail server.
The password used to log into the e-mail server.
Action
From the menu, select Nortel ASEM > Open. The Open Device
screen opens. This screen is illustrated in
(page
9).
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
"Open Device screen"
Advertisement
Table of Contents
