Sorting Table Data - Nortel NN47220-101 User Manual

4
5
6
7
8
Select a row in the Display rows where list, make a modification and click
Replace to modify a filter statement in the list.
Click Remove all and Filter to return to the unfiltered table.
Select a row in the Display rows where list and click the Remove button to
remove a filter statement from the list.

Sorting Table Data

Data in an Edit Table can also be sorted by column. Initially, rows are sorted
in order by column. To change the sort order, perform the following steps:
Step
1
2
Copyright © 2008, Nortel Networks
.
•
IS LESS THAN
• EQUALS
• DOES NOT EQUAL
The operator used depends on the column data and value type.
For example, if the column is an enumeration type that is based
on an enumeration MIB type, entering a number in the value field
compares enumeration numbers instead of string types. If the
value type is a string, it uses the label of the enumeration type for
comparison, instead of the number.
Enter a comparison value into the Value field.
Select AND, OR, or END from the last drop-down list. The AND and
OR operations go in the order of the filter statements from the top to
the bottom of the screen. Build complex filters by stringing together
various statements with AND and OR. Using the END operator
terminates the filter, even if it is not the last filter statement.
Click Add.
Repeat steps 1 through 6 for each filter statement that makes up
the larger filter.
Click Filter.
Action
Select the column to be sorted on.
Click the column once to sort in ascending order or twice to sort in
descending order.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Switch Configuration Tools 39
—End—