Table of Contents
Advertisement
10 Using the Nortel Application Switch Element Manager
Opening a Switch using SNMPv3
Before opening a switch using SNMP version 3, SNMP version 3 must be
enabled on the switch. Refer Nortel Application Switch Operating System
24.0 Command Reference (NN47220-105) for information on enabling
SNMP version 3.
To open a switch using SNMP version 3, follow this procedure:
Step
1
2
3
4
5
6
7
8
9
Previously Opened Switches
Any switch that was opened during past sessions appear as a folder in the
left-hand tree control navigation pane. This folder is be labeled with the IP
address or DNS name of the switch. Click on the desired folder to initiate a
new connection to the switch.
Copyright © 2008, Nortel Networks
.
Action
From the menu, select Nortel ASEM > Open. The Open Device
screen opens. This screen is illustrated in
(page
9).
Open the Open Device screen from the toolbar or by right-clicking on
the ASEM tree control. See
Tree Control" (page 25)
Identify the device to be opened by typing the Domain Naming
Services (DNS) name or Internet Protocol (IP) address of the device
in the Device Name field.
Click the v3 Enabled check box.
Enter the user name in the User Name field.
If applicable, select the appropriate authentication protocol in the
Authentication Protocol drop-down list. The options in the list
are None, MD5, and SHA-96. If None is selected, no further
configuration is required. Steps 6 to 8 assume that an authentication
protocol was selected.
Enter the authentication password in the Authentication Password
field.
If applicable, select the appropriate privacy protocol in the Privacy
Protocol drop-down list. The options are None and DES.
Enter the privacy password in the Privacy Password field.
Click Open.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
"Open Device screen"
"ASEM Toolbar" (page 21)
for more information on these options.
—End—
and
"ASEM
Advertisement
Table of Contents
