Modifying Label Appearance - Nortel NN47220-101 User Manual

The following sections describe the elements of the ASEM that can be
changed:
•
•
•
•
•
•

Modifying Label Appearance

The alias.properties file lists the correspondence between MIB
variables and the label used to describe that value in the application. To
change the label used, perform this procedure:
Step
1
2
3
Copyright © 2008, Nortel Networks
.
"Modifying Label Appearance" (page 43)
"Modifying the list of well-known ports" (page 44)
"Modifying or adding Well-known Protocols" (page 44)
"Altering the Default Browser" (page 45)
"Localization of ASEM" (page 45)
"Changing the MIB Default Values" (page 46)
CAUTION
Altering the appearance of the ASEM involves altering
.properties files located in the properties sub-folder of the
application installation. Nortel recommends that copies of the
original .properties files be saved in a separate folder before
altering them. These original files can be restored by replacing the
altered the files in the properties directory.
Action
Open the alias.properties file in a text editor. For Nortel
180 and AD Series switches, the file is located in <ASEM
installation directory>/properties/Tigon. For Nortel
Application Switches, the file is located in <ASEM installation
directory>/properties/aws24.
All entries in the file are listed in the following format:
MIB Variable=Description
Change the Description portion to reflect the new label to be used
in the application.
Note: Changing the MIB Variable portion causes the application
to use the system default value for the label.
Save the changes made to the file. These changes are displayed
the next time the application is started.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Customizing the ASEM Display 43
—End—