Nortel NN47220-101 User Manual page 34

34 Using the Nortel Application Switch Element Manager
Undocked Screen
Docking a Switch Screen
An undocked screen can be docked back into the right-hand frame. To
re-dock a panel, follow this procedure:
Step
1
2
Closing a Switch Screen
The operation of closing a switch screen is dependent upon the current
state of the screen. In undocked screens, clicking the Close button closes
the screen. In docked screens however, clicking the Close button has the
effect of closing and re-opening the screen; refreshing the contents of the
screen and all tabs.
The Apply, Revert, and Revert-Apply actions can also have the effect of
closing a screen. In undocked screens, executing one of these commands
closes the current screen. In docked screens, executing one of these
commands closes and re-opens it.
Copyright © 2008, Nortel Networks
.
Note: If an undocked screen is left undocked when ASEM is closed, the
screen will be re-open undocked the next time the application is run.
Action
Right-click on the screen displayed in the right-hand frame.
From the context menu, select the menu item Dock Panel.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
—End—