Nortel NN47220-101 User Manual page 7

Property screen fields
Field
Polling Fields
Status Interval
(If Traps, Status
Interval)
Hotswap Detect
Enable
SNMP Fields
Retry Count
Timeout
Trace
Register for Traps
Listen for Traps
Max Traps in Log
Trap Port
General Fields
Listen for Syslogs
Confirm row
deletion
Copyright © 2008, Nortel Networks
.
Description
The interval at which statistics and status information are
gathered.
If the Register for Traps check box is selected, then it
specifies the interval in seconds at which statistics and
status information are gathered.
The multiples of polling intervals between hotswap checks.
If checked, ASEM polls the switch according to the settings
listed above the Enable check box.
The number of times ASEM retransmits any SNMP message
before reporting a timeout message.
The length of time between each retry of each SNMP waiting
period, from 3 to 30 seconds.
If the retry count is set to 2 and the time-out value to 5
seconds, ASEM reports a timeout (no response from the
switch) after 10 seconds.
If checked, ASEM sends detailed SNMP information to the
log.
If checked, ASEM attempts to register the client's IP address
to one of the trap hosts' IP fields.
If checked, ASEM listens for traps and attempts to hook to
the trap port 162.
The specified number of traps that may exist in the trap log.
The default is 500.
The number of the port on which trap messages are
captured. The default is 162.
If checked, ASEM listens for syslogs and attempts to hook
to the syslog port 514.
If checked, ASEM requests for confirmation each time a row
in the application is deleted.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Setting ASEM Properties 7
—End—