Table of Contents
Advertisement
Switch Tree Context Menu items
Menu Item
Configure
Monitor
Apply Configuration
Save Configuration (back up)
Save Configuration (no back
up)
Revert
Revert Apply
Reset Switch
Diff
Diff Flash
Copyright © 2008, Nortel Networks
.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Description
Provides access to configuration commands for
the switch.
Provides access to the monitoring commands
for the switch.
Applies any changes that have been made to
the switch configuration.
Saves the current configuration in backup
memory and saves the active configuration by
overwriting the current configuration.
Saves the current configuration to the flash
memory.
Reverts the switch to the current active
configuration. This is available if the new
configuration settings were not applied.
Reverts the switch to the current saved
configuration. This is available if the new
configuration settings were applied but not
saved.
Reloads and saves the current RAM memory.
This is similar to cycling the power of the switch.
This feature is only available to Nortel
Application Switches.
Opens a screen to display any pending
configuration changes.
This feature is only available on Nortel
Application Switches.
Opens a screen to display any pending
configuration changes and the affected
configuration stored in flash memory on the
switch.
This feature is only available on Nortel
Application Switches.
The ASEM Interface 29
Advertisement
Table of Contents
