Frequently Asked Questions - Miele DGC 6705 Operating And Installation Instructions

,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
Problem
The appliance cannot
be turned on.
The demo program is
set and the device
does not heat.
The fan can still be
heard after the
appliance has been
turned off.
Possible cause and remedy
The circuit breaker has tripped.
^ Reset the circuit breaker (see the data plate for
minimum amperage).
There may be a technical fault.
^ Reset the circuit breaker if it has tripped.
If this is not the case, disconnect the appliance from
the power supply for 1 minute.
Reconnect the power and turn the appliance on. If it still
does not heat, contact Miele Technical Service.
^ Deactivate the demo program (see "Settings -
Showroom Program").
The appliance is equipped with a fan that directs vapors
from the oven interior to the outside. The fan will continue
to run for a while after the appliance has been turned off.
The fan automatically turns off after some time.

Frequently asked questions

125