Frequently asked questions
Problem
F 190
F 196
F..
Other fault messages
130
Possible cause and remedy
Defective water inlet valve
This defect can occur when the panel is opened or
closed while water is being supplied.
Confirm with "OK" and continue the operation.
If the fault message is displayed again, contact
Miele.
A technical fault has occurred.
^ Turn the appliance off and then back on again.
The drain filter in the oven floor is not installed
properly.
^ Turn off the appliance, seat the filter correctly:
and turn the appliance back on.
If the fault message shows again in spite of
solving the problem(s), contact Miele.
Technical fault
^ Turn the appliance off and call customer service.