Water Connection; Notes On Water Supply Connection - Miele DGC 6705 Operating And Installation Instructions

Water connection

Water intake a drain hoses

Notes on water supply connection

154
The water intake and drain hoses must be routed so that the
appliance can be easily pulled out for service work.
Before installation, check the hoses for visible damage.
Stainless steel intake hose:
Length 59" (1,500 mm) C 1/2" (12.5 mm) C Connection to
shut-off valve and the appliance both 1 5/16" (33.5 mm)
Plastic drain hose:
Length 118" (3,000 mm) C 1/2" (12.5 mm) C Connection to
trap 1" (26 mm) / Connection to the appliance 9/16" (15 mm)
When routing the water lines through piping, be sure the
internal duct diameter is at least 2" (50 mm).
The water supply connection must be made by a qualified
technician.
The water quality must comply with drinking water
regulations of the country in which the appliance is
operated.
The shut-off valve for the water supply must be easily
accessible after the appliance has been installed.
When a domestic water softener is installed, make sure
that the electrical conductivity of the water is retained.