iwc Aquatimer Automatic Operating Instructions Manual page 14

4
5
Once you have heard and felt that the bracelet or strap has
clicked into place, you can be sure that the bracelet or strap is
safely secured.
When using the rubber strap, please be aware that the strap with
the buckle should be attached to the 12 o'clock position on the
case.
When attaching a metal bracelet, you can use the IWC logo on
the clasp as a marker to ensure you align the bracelet correctly.
You can then attach the upper end of the bracelet to the 6 o'clock
position on the case – both the IWC logo on the dial and the clasp
should now be facing in the same direction.
To attach the bracelet or strap, hook the
notch of the horns from above into the
spring pin of the case (4).
Now return the bracelet or strap to its
original position (5) while simultaneously
6
pressing it down into the horns to snap it
into place (6).
A Q U A T I M E R A U T O M A T I C
— 1 4 —
6
5