More Features; Alarm Clock Setting - Hyundai RTCC 636 SURIP Instruction Manual

● When dubbing a pre-recorded cassette tape at high speed, a chattering sound is being heard.
To avoid this, set the volume control to a minimum level.
● Do no press o select the " Dubbing " button (6) to hi or nor. Position during dubbing, this will
vary the speed of recording and may be damage the cassette tape.
B. Recording from radio
● Select " Tuner " mode from Function selector (10)
● Tune to the desired station and insert a blank cassette tape in deck 1.
● Press " Record " & "play " key to start recording.
● Press " Pause " keys and then " stop/eject
C. Recording from CD/USB/SD
● Select " SD/USB/SD " mode from Function selector (10).
● Insert a black cassette tape in deck 1 which suitable for recording.
● Press " Pause " key first and then "Record " & " Play
function is now on stand by.
● Start playback of either CD/USB/SD mode, and then press "Pause key " at cassette to start
recording.
● To stop recording, press " Stop
pause " key and then "stop/eject
D. Recording from turntable
● Select " Phono " mode From function selector (10).
● Insert a blank cassette tape in deck 1.
● Press "Record " & " Play
● Select the desire record and start playback
● Press " Pause " keys and then " stop/eject

MORE FEATURES

A. SLEEP SETTING (BY REMOTE CONTROL)
1. The sleep function enables the system switch to standby mode automatically at a present
time.
2. Press "sleep/timer" button and sleep indicator "zzz" shown on the lcd display (2).
3. Keep pressing the button to adjust the sleep timer in the order of slp 90 > 75 >60 > 45 > 30 >
15 minutes.
4. System will stop and go to standby mode automatically after the selected timing.
5. To cancel the sleep mode, press "timer/sleep" button until " off " is display on LCD (2) & the
"zzz" indicator disappear.
B. ALARM CLOCK SETTING
This function allows the system to turn on automatically and wake you up by mode of CD, tuner,
or USB/SD.
7
Set the system at standby mode, then press and hold the " Timer/clk-adj " button (4)to enter the
program mode:-
1. wake up mode :
press the skip down
respectively, but make sure the music source has been prepared (CD – load with disc / tuner
– turn to the desired radio station / USB/SD – connect a USB mass storage device or SD/
MMC card with music file inside). Then press " Timer/clk-adj " button (4) to confirm the wake
up source
" key when finish.
" button (8) on CD/USB/SD mode first, then press the "
" key on cassette tape deck.
" key to start recording.
" key when finish.
(12) or skip up (26) button to select CD/USB/SD or tuner mode
EN - 61
" key at cassette. Recording
EN