Safescan 2210 User Manual page 7

A banknote with a different width than the first counted
banknote has been detected ("half note detection")
Remove the suspect banknote - this is the last counted banknote in the stacker - and press START to continue counting.
ADD AND BATCH FUNCTIONS
1. ADD
The ADD function enables you to count cumulatively. Once you remove a stack of counted banknotes and add a new
stack, these quantities will be added to the total count. The function can be activated by pressing the ADD button. The
indicator in the display will light up.
2. BATCH
.
The BATCH function enables you to create equal stacks of a pre-set number of banknotes. The counter will stop counting
when the set batch number has been reached. You can set the batch number as follows:
2.1
Press the BATCH button to activate the function. The indicator in the display lights up, including 2 blinking arrows.
The banknote has gone through the machine in a
skewed position (not fed straight inside the machine).
AUTO
AUTO
AUTO
AUTO
www.safescan.com
ENGLISH
7