Safescan 2210 User Manual page 6

ENGLISH
4.
The number of banknotes is shown clearly after the count has finished.
5.
Once you count a second stack of banknotes or re-count the first stack, the number of notes of the previous count will be
shown under CHECK in the display. To set this quantity to zero, press CLR.
ERROR MESSAGES DURING A COUNT
Once the machine detects a problem with a banknote, it will stop counting and show a clear message including the
type of issue. The error concerns the last counted banknote in the stacker. The following messages are possible:
There is a problem with the UV features.
A banknote with a different thickness has been detected, or
2 banknotes may be stuck together ("double note detection")
6
AUTO
AUTO
AUTO
AUTO
There is a problem with the magnetic features (Safescan
2250 only)
A banknote with a different height than the first counted
banknote has been detected (minimum difference 5mm)
www.safescan.com