Cooling/Fan Only Operation; Drying Operation - Vivax ACP-09CH25AEL User Manual

COOLING/FAN ONLY OPERATION

AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED
AUTO LOW MED HIGH
1
MODE
ON
TEMP
3
OFF
FAN
SPEED
4
AIR ECONOMIC
DIRECTION RUNNING
SWING
OK TIMER ON
CLOCK CANCEL TIMER OFF
TIME ADJUST

DRYING OPERATION

AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED
AUTO LOW MED HIGH
1
MODE
ON
3
TEMP
OFF
FAN
SPEED
AIR ECONOMIC
DIRECTION RUNNING
SWING OK
TIMER ON
CANCEL TIMER OFF
CLOCK
TIME ADJUST
Start
Connect the unit with the power.
The OPERATION lamp on the display panel of the indoor
unit starts flashing.
1. Mode select button (MODE)
Select COOL, HEAT (cooling only type without), or
FAN ONLY
2. Temperature button (TEMP .)
Set the desired temperature.
¡£
Cooling 21 C or higher
2
¡£
Heating 28 C or lower
3. Fan speed button (FAN SPED)
Select any of the "AUTO" "LOW", "MED" and "HIGH"
4. ON/OFF button
Push this button to start the air conditioner.
The OPERATION lamp on the display panel of the indoor
unit lights. The operating mode is selected in accordance
with the room temperature and operation starts after
approximately 3 minutes (If you select FAN ONLY mode,
the unit will start immediately.)
Stop
ON/OFF button
Push this button again to stop the air conditioner.
The FAN ONLY mode does not control temperature.
Therefore, perform only steps 1,3, and 4 to select
this mode.
Start
Connect the unit with the power.
The OPERATION lamp on the display panel of the indoor
unit starts flashing.
1. Mode select button (MODE)
Select DRY.
2. Temperature button (TEMP .)
Push the "TEMP ." Button.
2
The fan speed indicator displays AUTO. The Indoor fan
speed will be automatically selected LOW.
3. ON/OFF button
Push this button to start the air conditioner.
The OPERATION lamp on the display panel of the indoor
unit lights, and operation starts after approximately 3 minutes.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
8