Setting The Clock - Vivax ACP-09CH25AEL User Manual

NOTES
When replacing batteries, do not use old batteries or different type batteries. Otherwise
it may cause the remote controller to malfunction.
If you do not use the remote controller for more a few weeks, remove the batteries.
Otherwise, battery leakage may damage the remote controller.
The average battery life during normal use is approximately half a year.
Replace the batteries when there is no receiving beep from the indoor unit or if the
transmission indicator on the remote controller fails to light.

SETTING THE CLOCK

AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED AUTO LOW MED HIGH
MODE
ON
TEMP
OFF
FAN
SPEED
AIR ECONOMIC
DIRECTION RUNNING
SWING OK TIMER ON
2
CLOCK CANCEL TIMER OFF
3
TIME ADJUST
Before you start operating the air conditioner,
set the clock of the remote controller using
the procedures given in this section. The
clock panel on the remote controller will
display the time regardless of whether the
air conditioner is in use or not.
Initial Setting or the Clock
When batteries are inserted in the remote
controller, the clock panel will display "0:00"
and the colon will flash.
1. Time adjust button (TIME ADJUST)
push this button to set time.
Forward.
Backward.
Each time you push the button, the time
1
moves forward or backward by one minute
depending on which side you Push.
The time alters as quickly as you push the button..
5