Setting Number Of Rings; Checking Number Of Rings; Setting Day And Time - Topcom BUTLER 2450 User Manual

HANDL. B2450_euro.qxd
Butler 2450
Note: Even if the answering machine is off, the machine will automatically pick up after 10 rings in order to
enable remote activation (see 7.15 Remote operation)

7.5 Setting Number of Rings

The number of rings after which the answering machine will answer calls can be set from 2 – 9
and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine will answer
after 5 rings if there are no new messages, and after 2 rings if there are new messages. If there
are no new messages and you call your machine to check your messages remotely (see 7.15
Remote operation), you can hang up after the 2nd ring. You do not need to pay connection
fees and you know that you do not have any new messages.
• Briefly press the
• Press the
• Press the
• Confirm the setting by pressing the
internal voice.
Notes:
• If you do not press any keys for 3 seconds, the machine will revert back to the answering machine menu,
without changing the settings.
• If there is a loss of power in the base, the number of rings will revert to 3.

7.6 Checking Number of Rings

• Press the
• The internal voice will state the number of rings set.

7.7 Setting Day and Time

The day and time setting of the answering machine is independent of the telephone
component. The day and time of each call is registered and announced during play-back. The
format of the hour depends on the language of the internal voice. e.g. English is in 12-hour
format and German is in 24-hour format.
Programming the day and time:
• Keep the
• The internal voice will ask you to set the day.
• Press a few times on
settings.
• Press the
• The internal voice will ask you to set the hour.
• Press a few times on
• Press the
• The internal voice will ask you to set the minutes.
• Press a few times on
• Press the
The complete day and time setting is then repeated for confirmation.
19/7/02 2:56 pm
key. A voice will state the current number of rings.
key for 2 secs to set the number of ringing tones.
or key to change the current number of rings.
key. The current ring setting is confirmed by the
key briefly.
-key pressed down for 2 secs.
or keys to set the day. The internal voice states the current
key to confirm the day.
or keys to set the hour.
key to confirm the hour.
or keys to set the minutes.
key to confirm the minutes.
Page 28
28 28