Make a data call
Make a data call
The procedures in this section describes how to make basic data calls. There are
three methods used to make a data call; keyboard dialing, AT dialing and keypad
dialing.
Note: Throughout this guide,
Keyboard dialing
<CR>
£ and <CR>
<CR>
AT dialing
AT dialing is used in conjunction with your personal computer. To use AT dialing
follow these instructions:
AT + <CR>
ATDxxxx
<CR>
<CR>
4
<CR>
refers to a
Carriage
1. Press the
ENTER NUMBER OR H (FOR HELP)
2. Enter the
device and Press the
<CR>.
CALL CONNECTED SESSION STARTS
3. Press the
Follow normal procedures to login and use
the data service.
1. Enter
Return.
OK
2. Enter the
number of the far end data device).
3. Press the
CONNECT
4. Press the
Follow the normal procedures to login and
use the data service.
Return.
Carriage
Return.
number
of the far end data
Carriage Return
Carriage
Return.
and press the
AT
Carriage
ATDxxxx
(where xxxx is the
Carriage
Return.
Carriage
Return.