Additional Asynchronous Features; Autobaud; Autoparity; Modem Pooling - Nortel Meridian M3905 User Manual

Additional asynchronous features

MCA MCA parameter
Command
number
flfl
Emulation selection
fl‡
Lock/unlock data
parameters
fl°
VDN Key Assignment
Additional asynchronous features

Autobaud

Autobaud is enabled each time you release a data call.
Each time you press
to activate AT dialing, the MCA times the length of bits received and sets the baud
rate accordingly.

Autoparity

The MCA automatically sets the parity each time the letters
dialing.
In Keyboard dialing you must enter a period ( . ) and press
is normally the first step to take when your terminal displays a garbled prompt.

Modem Pooling

When you dial a modem pool, the
MCA prompts:
ENTER REMOTE NUMBER
XXXX < C>
34
Keypad dialing notes
Dial flfl and use the volume control key, scroll the
telephone's display until the correct modem type appears.
Dial fl‡.
Even if parameters are locked, they can be changed for a
call. The new parameters are used only for the active call.
MCA returns to the locked parameter settings when you
release the call.
Dial fl°.
This feature is used when your telephone is programmed
to have more than one Voice DN (VDN). This assigns the
VDN of your choice to originate voice calls through the
MCA.
to activate keyboard dialing or the letters
carriage return
1. Enter number
access and press the
Key.
are entered for AT
AT
return. This
carriage
of external modem to
Carriage Return
AT