Nortel Meridian M2008 User Manual page 42

During a call: On Hold on Loudspeaker
To talk privately to the party on the
Loudspeaker:
To use On Hold On Loudspeaker on
the Speech Monitor:
∫
Hot Line
˙
To talk privately to one of the parties
on the Speech Monitor
To disconnect a call from the Speech
Monitor:
To disconnect from the Speech
Monitor:
36
Use the handset on the Loudspeaker (if
provided).
While the Loudspeaker is active, any other
call is maintained on the handset. More
than one call can be put on hold, but only
one call at a time can be placed on the
Loudspeaker.
1. Make a call from
the Speech Monitor.
2. Place the call on Hold. The Speech
Monitor is automatically activated.
Take the call on the handset of the phone.
This conversation will not be heard on the
Loudspeaker. Any other user with a Speech
Monitor DN on their set can enter the call
by establishing a Multiple Appearance
Conference.
Replace the handset
while the call is active.
Switch off the Speech Monitor.
Hot DN or the DN
or press Release
of