Nortec Links Operation; Nortec Online Operation; Figure 12. Difference From Setpoint In Relation To Demand Signal; Figure 13. Duct And Wall Mounted Transducer - Nortec NH Series Installation Manual

D. NORTEC LINKS 2 OPERATION
(1) NORTEC LINKS 2 is an option that can be integrated with the NHTC. This allows a
BMS to monitor and in the right configuration, control the humidifier. For additional
information about NORTEC Links and its operation and configuration, go to
www.humidity.com
(2) Table 5 contains a list of NORTEC LINKS 2 variable definitions. For a complete list,
contact the factory.
E. NORTEC ONLINE OPERATION
(1) NORTEC OnLine is an option that can be integrated with the NHTC. This allows a user
to log onto the internet, go to
their unit from any computer with an internet connection. (See Figure 14)
(2) After initially logging into the NORTEC OnLine server the user will be presented with a
list of humidifiers currently registered with the Server program. Each humidifier will be
listed with a unit type identifier, a serial number and an address descriptor.
(3) By clicking on the humidifier name, the user will then be brought to a status screen with
an image of the selected humidifier.
(4) Figure 14 shows a typical NORTEC OnLine Monitoring Screen. Use this manual in
combination with NORTEC OnLine to be able to monitor and understand the settings
possible through the NORTEC OnLine Interface.
Figure 12. Difference from Setpoint in
Relation to Demand Signal
10-20
Page 47
2008-08-28
and look up the NORTEC LINKS 2 manual.
www.norteconline.com and log in to allow them to monitor
Figure 13. Duct and Wall Mounted
Transducer