The Default Settings Are; Additional Handsets And Bases - Topcom Sologic b931 User Manual

The default settings are:

Dial Mode:
Flash time:
PIN Code:

13 Additional handsets and bases

You can subscribe up to 5 handsets on one base. Each handset can register to 4 base
stations and the user can select which base he wants to use. By default the handset 1 is
registered to the base unit 1.
13.1 Adding a new handset
This is only needed when you have deregistered a handset or when
you bought a new one.
Keep the paging key
in subscribing mode for 3 minutes. Do the following to subscribe the handset:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• The handset will now search for a base end when it's found the system PIN code (base
PIN code; default='0000') is asked.
• Enter the PIN code and and press 'Select'.
• The standby screen will appear when successfully registered and handset name and
number will be shown.
Each handset can be subscribed to 4 different DECT base units. Each
base unit is assigned a number from '1' to '4' in the handset. When
you subscribe a new handset, you can assign a base unit number. It
is best to use '1'.
13.2 Removing a handset
It is possible to cancel subscription of a handset to a base. You should do this if a handset is
damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the
handset you are using to do the remove procedure.
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the PIN code and press 'OK'.
• Use the up or down key
handset or a non-existing handset, a warning tone will be heard.
• Press 'Select'
13
Sologic B931
Tone
Flash-1
0000
on the base unit pressed for 5 seconds. The base unit will stay
17
/
15 7
/
15 7
/
15 7
/
15 7
/
15 7
to confirm your selection or press 'Back'
repeatedly until 'Registration' is selected.
to select a base (1-4).
repeatedly until 'BS Settings' is selected.
repeatedly until 'Terminate HS' is selected.
to select the handset. If you select the current
Sologic B931
5 to leave the menu.
23