To Erase Calls; To Erase One Call; To Erase All Calls; Call Back - Topcom CALLMASTER 250 User Manual

Callmaster 250

4.10 To erase calls

4.10.1 To erase one call

Use the Up or Down button to look for the number that you want to
erase in the call list. Press the Erase button once to delete the call
shown on the display. When one call is erased, the other numbers in
the memory will be re n u m b e red.

4.10.2 To erase all calls

Press and hold the Erase button for 2 seconds and all calls in the
memory will be erased.

4.11 Call back

You can directly call back numbers that are saved in the memory.
• Make sure that the local area code and the area prefix are correctly
p rogrammed before you use this function.
• Press the Up or Down button to search the person you want to
call back.
• When the number is displayed, press the Mode/Call button.
The desired number will be dialled.
• On the display appears "DIALING".
Note : The call back function will only work when the phone is connected to
the 'PHONE' connection of the Callmaster 250.

4.12 To set default settings (reset)

Press and hold the Mode/Call button and then press the Set button.
The display shows : "RESET VXXX". Press the Set button again briefly.
The default settings have now been reset :
• Call list = empty
• Recorded names = none
• Recorded OGM = none
45 45 45 45 45