Arctic Cat Sno Pro 500 Operator's Manual page 94

Phillips-Head Bits (1/4 in. Hex Drive)
p/n: 0644-319 (#2)
p/n: 0644-318 (#3)
Usage: With Quick-Disconnect Coupler (p/n 0644-308),
remove and install Phillips-head screws.
Quick-Disconnect Coupler
p/n: 0644-308
Usage: Hold 1/4 in. hex drive Torx Bits (page 90), Hex
Bits (page 87), and Phillips-Head Bits (page 88).
88
Replacement Rivnuts
p/n: 0623-557 (1/4 x 20)
p/n: 0623-582/627 (1/4 x 20)
p/n: 0623-581 (5/16 x 18)
p/n: 0623-699 (3/8 x 16)
p/n: 0623-874 (8-32)
p/n: 0623-529/779 (10-32)
Usage: With Rivnut Tool (p/n 0644-232), replace rivnuts.
0644-318
Rivnut Tool
p/n: 0644-232
Usage: Collapse and install rivnuts.
0644-308
Toggle-Switch Wrench
p/n: 0644-566
Usage: Remove/install a toggle switch on 2010-2011 Sno
Pro 500.
0623-557
0644-232
0644-566