Rds Operation; Traffic Announcement; Receiving Traffic Information Manually; Turning Af (Alternative Frequencies) On Or Off - Alpine INE-W611D Owner's Manual

RDS Operation

Traffic Announcement

Touch .
The "TA" indicator is displayed and the unit switches to standby
mode to receive traffic announcements.
When a traffic announcement is received, the "TP" indicator lights
up and a corresponding popup is displayed. Press [Close] to close.
Press [TA Off] to turn the TA feature off.
• The "TP" indicator lights up during standby mode off in a condition
other than radio source to indicate that the unit is receiving the
traffic announcement.
• If the traffic announcement broadcast signal falls below a certain
level, the unit remains in the receiving mode for 1 minute.

Receiving Traffic Information Manually

to turn on the Traffic Information
1 Touch
mode.
The "TA" indicator lights up.
2 Touch or .
Seeks the broadcast station which is broadcasting the traffic
information.
• You can seek the traffic information in DX Seek mode.
Turning AF (Alternative Frequencies)
On or Off
The RDS (Radio Data System) is a radio information system using
the 57 kHz subcarrier of regular FM broadcasts. The RDS allows
you to receive a variety of information such as traffic information,
station names, and to automatically re-tune to a stronger transmitter
that is broadcasting the same programme.
1 Touch .
2 Check the [AF] box to turn the feature on.
When AF is turned on, the "AF" indicator will be lit up.
• RDS mode is not displayed for the MW or LW band.
• When the AF is turned on, the unit automatically tunes to a strong
signal broadcast in the AF list.
• Turn the AF off when automatic re-tuning is not required.

Regional Stations

This feature allows users to lock-down the device to their
current region or allow the radio to tune into other region specific
programming.
1 Touch .
2 Check the [Regional] box to turn the feature on.
When Regional feature is turned off, the unit automatically
keeps receiving the local RDS station.

Sound Settings

→ [Sound Settings]
Touch
For details, refer to the "Sound" on the page 65.
21
-EN