Searching For A Place Of Interest By Name - Alpine INE-W940 User Manual

13. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.2.4 Searching for a Place of Interest by name

You can search for Places of Interest by their names. You can search around different locations or along
your route in the whole Place database or in one Place category or subcategory only.
1. In the Navigation menu, tap the following buttons:
2. Tap .
3. Select the area around which the Place should be searched for:
•
Tap
around the last know position. (The result list will be ordered by the distance from this
position.)
•
Tap
be ordered by the distance from the center of the selected city/town.)
•
Tap
(The result list will be ordered by the distance from the destination.)
•
Tap
This is useful when you search for a later stopover that results in a minimal detour only,
such as searching for upcoming gas stations or restaurants. (The result list will be ordered
by the length of the necessary detour.)
and start your journey.
to search around the current position or if it is not available,
to search for a place within a selected city/town. (The result list will
to search for a place around the destination of the active route.
to search along the active route, and not around a given point.
to modify route parameters, or tap
,
43
.