Replacing A Variable Speed Blower - Compaq TA1000 Reference Manual

Replacing a Variable Speed Blower

NOTE: The power supply design ensures that removing a blower does not change the
airflow within the enclosure. However, do not remove a blower until the replacement
blower is available.
1. To remove the blower from the power supply, push in on the two blower
tabs 1 while pulling on the blower element.
Figure 7-3. Location of blower tabs
WARNING: The blower blades rotate at a high speed and do not stop
immediately when power is removed. Avoid touching the rotating blades when
removing the blower.
1
CAUTION: Pressing on the center section of the blower can damage the blades.
Only press on the outer edge of the blower when installing the blower.
Customer Replaceable Units 7-5
1