Compaq TA1000 Reference Manual page 21

2-8 Compaq TA1000 Tape Drive Array Reference Guide
1. Position the tape array on the mounting brackets with the Compaq logo
in the upper left corner, and slide it in until the tape array flanges 1
contact with the front vertical rails.
2. Once the tape array is fully inserted, verify that both tape array front
flanges contact the rack vertical rail and the rear of the tape array is
properly seated in the mounting brackets.
3. Secure the enclosure using the attached captive thumbscrews.
1
Figure 2-6. Installing the tape array into the rack