Dual-Bus Scsi Address Maps; I/O Module Power Protection - Compaq TA1000 Reference Manual

Dual-Bus SCSI Address Maps

The dual-port I/O module assigns a SCSI address to each drive bay in the
enclosure (see Table 3-2).
1
Bay
SCSI ID
00

I/O Module Power Protection

A voltage sensor in the I/O module detects overcurrent conditions. Should this
error occur, the sensor disconnects the voltage from the I/O module and the
power LED goes Off. This disables the I/O module until one of the following
conditions occurs:
I
The overcurrent condition no longer exists.
I
The defective I/O module is replaced.
Table 3-1
Dual-Bus SCSI IDs
2 3 4
SCSI Bus A
01 02 03
5 6 7
SCSI Bus B
04 00 01
I/O Module 3-3
8 9 10
02 03 04